1. Spare part of powder coating system

2.  For Automatic powder gun 393 568

3. For Manual powder gun 1002 100

Manual / Automatic Powder Coating Gun Parts Replacement

COLO-06 Select

Manual powder gun

Electrical data

Input voltage 10 V eff.

Frequency approx. 18 kHz

Max. output voltage 100 kV

Polarity negative

(optional positive)

Max. output current 100 μA

High voltage display by LED

Ignition protection Ex 2 mJ T6

Temperature range 0°C - +40°C (+32°F - +104°F)

Max. operating temperature 85°C (+185°

manual powder gun - complete

negative polarity, incl. gun cable - 6 m, rinsing air hose - 6 m, flat jet nozzle, brush

and parts kit, without powder hose  1002 100

 manual powder gun shaft (incl. cascade)

Negative polarity (-) 1001 891

Positive polarity (+) 1001 892

 Cascade (negative polarity) - complete 1000 809

Cascade (positive polarity) - complete 1002 031

1   Gun body 1001 155

Handle - complete set (pos. 5, 6, 7 and 8) 1000 807

2   Trigger - complete (incl. pos. 2 and 3) 1001 341

3   Compression spring - 0.36x4.2x49.4 mm 1001 487

4   Trigger cover 1000 801

5   Grasp termination 1000 806

6   Radial gasket 1000 803

7   Gun cable - L=6 m, complete 1001 528

Extension cable for gun cable - L=6m, incl. safety clamp 1002 161

Extension cable for gun cable - L=14m, incl. safety clamp 1002 162

Safety clamp for extension cable 1002 064

8   Grub screw - M3x8 mm 1000 844

10   Powder tube - complete 1001 339

10.2   O-ring - Ø 12x1.5 mm 1000 822

1  1 Rinsing air connection 1000 804

12   Clip ring 1000 898

13   Compression spring 1001 488

COLO-GA02

Automatic powder gun

Powder gun body 2-A - complete, negative polarity 393 649

Gun cable - complete, 20 m (65,61 ft), see also "Gun cable" spare parts list 393 827

2-A shaft - complete, negative polarity    393 665

Powder tube - complete 385 182#

Clamp sleeve        358 584

Hose connection - complete 362 670#

Pay attention:  these only are cheaper replacement ,not original items

All parts can work with original parts ,same size

All parts are manufactured by or for COLO , as “after market” replacement parts

For powder coating equipment . The trade mark names are owned by  their respective companies and are used only for customer convenience.