Manual gun control unit - front plate

1. Front plate - complete 1000 395

2. mainboard V1.0 - complete, with display 1000 875

3. hrottle motor - completely assembled 1000 064

Powder Coating Gun Parts, Colo- CG07 Manual Gun Control Unit

Colo- CG07

Manual gun control unit

Manual gun control unit - front plate

Front plate - complete 1000 395

mainboard V1.0 - complete, with display 1000 875

hrottle motor - completely assembled 1000 064

Electrical data

CG07

Mains input voltage 100-240 VAC

Operating frequency 50-60 Hz

Input power (without vibrator) 40 VA

Nominal output voltage (to the gun) max. 12 V

Nominal output current (to the gun) max. 1 A

Vibrator connection and power (on the Aux output) n110/220 VAC nmax. 100W

Pneumatic data

OptiStar CG07

Compressed air connection (on control unit) Elbow connection 8 mm

Compressed air main connection (on filter unit) G1/4'' - female thread

Max. input pressure 10 bar / 145 psi

Min. input pressure (while unit in operation) 6 bar / 87 psi

Max. water vapor content of the compressed air 1.3 g/m³

Max. oil vapor content of the compressed air 0.1 mg/m³

Dimensions

CG07

Width 248 mm

Depth 250 mm

Height 174 mm

Weight approx. 5.2 kg

All parts can work with original parts ,same size

All parts are manufactured by or for COLO , as “after market” replacement parts

For powder coating equipment . The trade mark names are owned by  their respective companies and are used only for customer convenience.