filter cartridge booth  / powder spray booth / manual powder spray booth 

1. filter cartridge powder coating recovery system

2. Virtual 100% recovery of powder for reuse

3. Recovery system is fully automated system

Manual Filter Cartridge Powder Spray Booth , Powder Spraying Room

The filter cartridge technology is a state-of-art technology worldwide in powder recovery systems. Major and small powder coaters globally have already or are switching over from cyclones and other forms of outdated and inefficient powder recovery systems to the filter cartridge type.Further, within this technology, all filter cartridges used are now only made from polyester, treated with PTFE (Teflon) which has a life of over  more than 8000 hours.

This powder recovery technology gives you as the user innumerable advantages …

1. Virtual 100% recovery of powder for reuse. This, when compared to outdated and conventional recovery systems like cyclones (single or multi) translates into savings which could run into lakhs of rupees. Compared to virtually 100% recovery efficiency  in the cartridge  Series systems, the best designed multicyclones give a recovery of no greater than 95% and poorly designed or manufactured  cyclones or other recoveries could be as low as 70-80% only or sometime even lower. Efficiency figures for cyclones, etc go down still further when using  light shades like whites, off-whites, light greys due to these powders’ lower bulk specific density.  

2. Color change time: One of the major advantages the cartridge Series filter cartridge system offer is the speed with which color change can be effected – often as low as or even lower than 20-30 minutes only. Color change requires the main coating booth space to be cleaned and the filter modules then changed with that of the next color.

3. Extremely compact systems freeing valuable shop-floor space for other purposes (including storage) – which means that a system can be installed in small areas now

4.Recovery system is fully automated system requiring no operator interaction

5. Virtually maintenance-free for years at a time in this technology in India – with a huge base of Indian and overseas users of such systems.

Polyester-PTFE cartridge type recovery systems when used for more than 2 colors are a little more expensive to purchase (capital cost) compared to conventional and old-dated technology products like cyclones, etc. However, their unmatched efficiency and lower footprint more than offsets this and pays for itself within a very short period of time – saving you, the user, huge sums of money thereafter.

Today, filter cartridge technology in powder recovery has found such tremendous appeal with coaters worldwide that even when using a large number of colors, coaters now have individual and separate mobile filter cartridge powder recovery modules – for one or two of their main colors (where powder is recovered and reused) and one mobile recovery system set for all the other colors (called spray-to-waste) where the powder is recovered from point of view of pollution control